High Accuracy NDIR CO2 Sensor CM1106HA-NS-1.png

High Accuracy NDIR CO2 Sensor
CM1106HA-NSCM1106HA-NS

High accuracy with ±75ppm@400-2500ppm to meet newest AHSRAE 62.1-2022 standard for demand control ventilation(DCV) applications, CO2 sensor CM1106HA-NS can be used to detect CO2 concentration of indoor air by adopting advanced non-dispersive infrared technology (NDIR). With auto-calibration, no need of maintenance. It is widely used in ventilation system, HVAC, air conditioner, air purifier, IAQ monitor, agriculture, plant cultivation and cold-chain, etc.

Product Inquiry

Features

NDIR technology with independent intellectual property
Temperature calibration within whole measurement range
Long life span, auto-calibration, maintenance free
Small size and compact structure, easy to install

Specifications

	CO2 Sensor CM1106-C
Measurement range	PWM: 0-2000ppm UART/ I²C: 0-10000ppm (Note 1)
Working temperature	-10°C ~ 50°C
Working humidity	0-95%RH (non-condensing)
Storage temperature	-30°C ~ 70°C
Storage humidity	0-95%RH (non-condensing)
Accuracy	±75ppm@400-2500ppm, normal temperature and pressure. (Note 2 and 3)
Sampling frequency	1s
Response time	≤ 30s
Power supply	DC 4.5V~5.5V
Ripple wave	<50mV
Working current	<50mA
Dimensions	33x19.7x8.9mm (pin is not included)
Weight	5g
Signal output	UART_TTL /I²C/PWM
Lifespan	≥15 years
Maintenance	Maintenance-free for normal indoor application with Auto-calibration

Note 1：Sensor is designed to measure in the range 0~2000ppm (PWM),0-10000ppm (UART_TTL/I²C) with specified in the table accuracy. Nevertheless exposure to concentrations below 400ppm may result in incorrect operation of ABC algorithm and shall be avoided for model with ABC ON.
Note 2: In normal IAQ applications, accuracy is defined after minimum three (3) ABC periods of continuous
operation with ABC on. Some industrial applications do require maintenance. Contact Cubic for further information
Note 3: Specification is referenced to certified calibration mixtures. Uncertainty of calibration gas mixtures (±2% currently) is to be added to the specified accuracy for absolute measurement.
* The above features and specifications are preliminary version. Some contents might be changed before the product is mass-production.
To get more technical information, please contact info@.